Annie Chemie P Ltd. India Annie Chemie P Ltd, is a company at Dahej in Gujarat, India. It is a manufacturer exporter of Ammonium Chloride & Ammonium Sulfate and oil field shale gas fracking or hydraulic fracturing chemicals and speciality chemicals and it has substantial exports to countries like USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Kuwait, Dubai etc. We have developed encapsulated guar gel breaker based on coated ammonium persulfate, potassium persulfate, sodium persulfate, potassium peroxymonopersulfate, sodium bromate etc. We also supply other coated or encapsulated products like citric acid, guar crosslinkers other shale gas frac related products like diverting agent, KCl-substitute or clay-stabilizer, corossion inhibitors, scale inhibitor, bio-guard and several speciality chemicals.

Home ----------------- Contact Us

Ammonium Sulfate SDS of Suppliers Exporters, Manufacturers

Ammonium Sulfate
CAS Number: 7783-20-2, Suppliers Exporters, Manufacturers
Ammonium Sulfate Manufacturers Exporters

Please visit Main Page of Ammonium Sulfate USP NF Reagent FCC Food Grade Manufacturers.

Ammonium Sulfate SDS Safety Data Sheet
MSDS Sheet
06-May-22

Section1. Product Information

Product Name & Other Names : Ammonium Sulphate or Ammonium Sulfate or Diammonium Sulfate.
CAS Number: 7783-20-2
EINECS EC Number: 231-984-1
Relevant uses and uses advised against (if any): Industrial use only.
Supplier: As per letterhead.

Section 2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according to Regulation (EC) No 1272/2008

GHS Label Elements
None

Signal Words: None

Precautionary statements:
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P273 Avoid release to the environment.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P330: Rinse mouth.

Section 3. Composition/Information on Ingredients

Product Name & Other Names: Ammonium Sulphate or Ammonium Sulfate or Diammonium Sulfate.
CAS Number: 7783-20-2
EINECS EC Number: 231-984-1

Section 4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Skin: Wash promptly with soap and water and flush with water until chemical is removed. Remove any contaminated clothing and wash before reuse. Get medical attention for irritation.
Eyes: Flush promptly with plenty of water for at least 15 minutes. Get medical attention.
Inhalation: Remove to fresh air. If breathing is difficult, give oxygen if a qualified operator is available. Get medical attention for irritation or discomfort.
Ingestion: If conscious drink 2 to 4 glasses of water and induce vomiting by touching back of throat with finger.

Section 5. First Aid Measures

Flash Point: Not applicable
Extinguishing Media: Any standard agent may be used. If involved in a fire, flood with water.
Unusual Fire and Explosion Hazards: Ammonium Sulfate decomposes at elevated temperatures to produce toxic fumes of ammonia and sulfur oxides. If mixed with strong oxidizers such as ammonium nitrate or potassium salts (nitrite, nitrate, or chlorate), a vigorous reaction may occur. Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At elevated temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. Do not let the product enter drain.

Section 6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Flush residue with water if permitted by applicable disposal regulations.

Section 7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like strong oxidizing agents, strong acids & bases. Avoid Sources of ignition. Direct sunlight.

Section 8. Exposure Controls/Personal Protection

Exposure Limits: No occupational have been established for this product. Keep it at <10mg/m3.
Engineering Controls: Provide local exhaust, if dusty conditions prevail.
Respiratory Protection: Where dusty or misty conditions require it, use a NIOSH approved dust or mist respirator for needed protection.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

Section 9. Physical and Chemical Properties

Appearance: Colorless to off-white crystals or granules.
Odor: Odorless
Odor threshold: Not available.
pH: 5-6 at 5% water solution.
Relative density: around 1.77
Boiling Point: > 280 °C (536 °F)
Melting Point: - 235 °C (-391 °F)
Flash point: Not available.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility in Water: (Weight %) 38% solution @ 20C
Viscosity: No data found.
Molecular Weight: 132.14
Chemical Formula: (NH4)2 SO4

Section 10. Stability and Reactivity

Normally Stable (Conditions to Avoid): It is stable under normal conditions.
Incompatibles:
Oxidizers, e.g., potassium salts -nitrate, nitrite, chlorate, also chlorine or hypochlorite. Strong acids & bases. Avoid contact with zinc-clad and copper.
Hazardous Decomposition Products: Ammonia and sulfur trioxide and sulfur dioxide gases.
Hazardous Polymerization: Will not occur.

Section 11. Toxicological Information

Immediate (Acute) Effects:
Acute Oral LD50 Rat: 2840 mg/kg
Acute Inhalation LC50 Rat: > 1000 mg/m³ 8 Hours
Acute Dermal: LD50 dermal rat: 2840 mg/kg (Rat)
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC.
Mutagenic Effects: No data found.
Teratogenic Effects: No data found.
Developmental Toxicity: No data found.
Reproductive Effects: No data found.

Section 12. Ecological Information

LC50 Fish-1: 5.2 - 8.2 mg/l (Exposure time: 96 h - Species: Oncorhynchus mykiss [static])
LC 50 Fish-2: 32.2 - 41.9 mg/l (Exposure time: 96 h - Species: Oncorhynchus mykiss [flow-through])
EC50 Daphnia-1: 423 mg/l (Exposure time: 24 h - Species: Daphnia magna)
EC50 Daphnia-2 14 mg/l (Exposure time: 48 h - Species: Daphnia magna)
EC50 Water flea (Ceriodaphnia dubia): 52 - 67 mg/l 48 hours
LC50 Pink salmon (Oncorhynchus gorbuscha): 0.068 mg/l 96 hours
LC50 Rainbow trout, donaldson trout (Oncorhynhus mykiss): 35.2 - 43.8 mg/l 96 Hours
Bioaccumulation: Not expected to bioaccumulate.
Persistence and Degradability: Not likely to persist.
Mobility: Likely to be mobile due to water solubility.

Section 13. Disposal Considerations

Other Disposal Considerations: The product is a fertilizer; therefore, waste ammonium sulfate might be used as a fertilizer. If discarded to waterways, it may promote eutrophication. Disposal must be in accordance with applicable disposal regulations.

Section 14. Transport Information

DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IMDG/IMO
& IATA/ICAO: Not controlled.

Section 15. Regulatory Information

USA Regulations:
SARA Section 311/312
: See section 2.
California No Significant Risk Level: None of the chemicals in this product are listed.

Section 16. Other Information

Disclaimer:
Our company provides this Ammonium Sulfate Sulphate SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Ammonium Sulfate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals must exercise their independent judgment in determining its appropriateness for a particular purpose.

Please visit Technical Data Sheet of Ammonium Sulfate Suppliers.

Ammonium Chloride CAS Number 12125-02-9 & Ammonium Sulfate CAS Number 7783-20-2 Supplier Exporter, Manufacturer:

Annie Chemie P Ltd
Mumbai 4000010, INDIA
With Agents and offices in UAE, USA, Europe.

e-mail: info@anniechemie.com

Copyright and Usual Disclaimer is Applicable.
October 1, 2023

Exporters to USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc.

Perfection is made up of small things and that is a big thing.